Tennessee Mold Consultants
201 Center Park Drive, Suite 1170
Knoxville, TN 37922
865-558-9772
Mold Test Kit Instructions
USE TESTING MATERIALS
AS SOON AS YOU RECEIVE THEM.
Locate the area or areas you wish to test; for example, areas where you have the
most problems with sneezing and coughing. Do not place in DIRECT SUNLIGHT.
Do what you normally do. Don’t turn on the air conditioner, for example, unless
that is what you normally do. Don’t sweep or vacuum just before the test. If the
kids play inside, let them play inside during the test. Just don’t let them
touch the materials. ACT NORMALLY!!!
-
Carefully unwrap the materials. Do not touch
the insides of the test plates.
-
Lift the top straight up. The top is the
part without the jelly stuff in it.
-
Without turning it over,
place the top on a tissue beside the test plate.
-
Run test one hour.
-
DO NOT turn the top upside down.
-
Put the top back on the plate.
-
Write your name, the name of the room
tested, and the date on the bottom of the plate with a PERMANENT
MARKER.
-
Wrap everything in aluminum foil. Put the
material into the box it came in.
-
Mail test kits to the address in the upper
right hand corner.
Shipping Instructions:
From October to April:
-
Please wait 4 days before shipping your test
kits. Keep your test kits in a warm dry area out of direct sunlight. This
period of time allows your test kits to grow so they can be properly
analyzed.
-
DO NOT leave the test kits in your car, EXTREME cold will ruin your
test kits and render them useless.
From April to October:
-
Please mail your test kits as soon as
possible. Keep your test kits in a warm dry area out of direct sunlight.
-
DO NOT leave the test kits in your car, EXTREME heat will ruin your
test kits and render them useless.
If you have any questions,
please call … 865-558-9772